Exam guide
NICET Inspection and Testing of Water-Based Systems Level I Exam
What's on it, how it runs, which books you can bring, and how to get ready. NICET facts link to NICET's own pages.
- Questions
- 115
- Time
- 125 min
- Exam fee
- $235
- Books allowed
- NFPA 25, OSHA 29 CFR 1910
What the exam is and who takes it
Inspection and Testing of Water-Based Systems (ITWBS) is NICET's certification for engineering technicians who inspect and test existing water-based fire protection systems, including finding and handling emergency and pre-planned impairments.
“Level I is designed for technicians who perform limited job tasks under direct supervision.”
Passing the exam is one part. NICET Inspection and Testing of Water-Based Systems Level I certification takes the Level I exam, at least 6 months of experience, and supervisor verification of NICET's performance measures. Details: NICET certification requirements (opens nicet.org in a new tab)
What's on it
NICET's content outline splits the exam into these work elements. The range is each one's share of the questions.
- 1.1Safety5–15%
- 1.2Identify Condition and Operation of System Components32–43%
- 1.3Prepare Preliminary Documentation17–27%
- 1.4Operate Components Under Direct Supervision26–36%
Source: NICET ITWBS Level I content outline (PDF) (opens nicet.org in a new tab)
Exam format
- 115 questions, 125 minutes.
- Computer-based, at a Pearson test center.
- One question at a time, and you can move back and forth. Some questions have an exhibit to open, a few have you click part of a picture, and some have more than one right answer. Those tell you how many to pick.
- The appointment runs 10 minutes longer for a tutorial first. Unused tutorial time doesn't add to your exam time.
- A calculator is built into the exam. Personal calculators aren't allowed in the testing room.
- You can take an unscheduled break, but the exam clock keeps running.
- You get an unofficial score report when you finish.
Source: NICET Inspection and Testing of Water-Based Systems program page (opens nicet.org in a new tab)
What the exam costs and which code edition it uses
NICET charges $235 per attempt at this exam (fees effective August 1, 2026). Moving your date more than 24 hours out, in the same testing window, is free. Inside 24 hours, or into a new window, NICET adds half the exam fee.
The exam is written against NFPA 25 (2023). NICET updated the Level I and II exams on June 2, 2025 and the Level III exam on December 1, 2025.
A fail costs the fee again, so study until ForemanForge's readiness meter reads Exam Ready, then book one date.
Sources: NICET testing fees (opens nicet.org in a new tab) · NICET program news (opens nicet.org in a new tab)
Reference books you can bring
NICET's list for this exam allows these titles in the test center:
- NFPA 25 (2023) — Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems
- OSHA 29 CFR 1910 — General Industry Safety Standards
Rules for your books
- Bound, or secured in a three-ring binder with a title page.
- Highlighting and self-adhesive index tabs or dividers are fine, as long as they're permanently attached.
- No handwritten notes. No loose pages, freestanding tabs, or repositionable sticky notes or tabs.
- An NFPA Handbook isn't accepted in place of a listed title.
- NICET strongly urges bringing these editions. Older or newer editions are at your own risk.
- Some of these titles are also on-screen during the exam. NICET's list shows which.
Source: NICET's current reference list for this exam (PDF) (opens nicet.org in a new tab)
How to prepare
- Get the books. Buy the exact editions on NICET's list in print, bound or in a binder, and tab them.
- Study out of the book. Look up every answer in the code instead of memorizing it. On exam day, knowing where to find a requirement is what saves time.
- Spend time where the points are. Identify Condition and Operation of System Components is 32–43% of this exam.
- Practice on the clock. NICET gives you 125 minutes for 115 questions, about 65 seconds a question.
What ForemanForge has for this exam
- 6 lessons.
- 288 practice questions, with hints that point you to the code section.
- Timed exam mode: a full-length 115-question, 125-minute exam, the same length as NICET's.
- A readiness meter that scores you on each work element above, weighted by its share of the exam.
How ready are you for the real exam?
ForemanForge's readiness meter gives you one score for the NICET Inspection & Testing Level I exam. It counts every question you answer in the lessons and practice, scores you on each work element in NICET's content outline, and weights each one by its share of the exam.
- Your score shows after 20 answered questions and moves as you study.
- It shows which work elements are pulling your score down, so you know what to study next.
- Timed exams count, and it won't read Exam Ready until you've scored 70% or better on a timed exam in the last 60 days.
- Building · under 60
- Borderline · 60–74
- Exam Ready · 75 and up
The score is an estimate of how you'd do on the exam, not a guarantee of passing. NICET doesn't publish a fixed pass mark.
Start studying for Inspection & Testing Level I
The first lessons of every level in each track are free. Have an account? Log in
FAQ
How many questions are on the NICET Inspection & Testing Level I exam?
115 questions, and you get 125 minutes.
Source: NICET Inspection and Testing of Water-Based Systems program page (opens nicet.org in a new tab)
Can I bring my code books?
Yes, the titles on NICET's list for this exam: NFPA 25 (2023) and OSHA 29 CFR 1910. They have to be bound or in a three-ring binder with a title page. Highlighting and permanently attached tabs are fine. Handwritten notes and sticky notes are not.
Source: NICET reference list (PDF) (opens nicet.org in a new tab)
Can I bring my own calculator?
No. The exam has a calculator built in, and personal calculators aren't allowed in the testing room.
Source: NICET Inspection and Testing of Water-Based Systems program page (opens nicet.org in a new tab)
What score do I need to pass?
NICET reports a scaled score, and 500 or above is a pass. Below 500, the report shows your scaled score and, on multi-domain exams, your percent correct by domain or section.
Source: NICET score report FAQ (opens nicet.org in a new tab)