Exam guide · NICET exam 10014

NICET Water-Based Systems Layout Level III: Hydraulics and Water Supply Planning Exam

What's on it, how it runs, which books you can bring, and how to get ready. NICET facts link to NICET's own pages.

Questions
60
Time
240 min
Exam fee
$295
Books allowed
NFPA 13, NFPA 14, NFPA 20, NFPA 291, Brock
Free WBSL Level III: Hydraulics and Water Supply Planning practice test10 questions with answers and where to find each one in the code book

What the exam is and who takes it

Water-Based Systems Layout (WBSL) is NICET's certification for engineering technicians who lay out and detail water-based systems that have to meet code and statutory requirements.

“Level III is for technicians who can work independently with standards, plans, and specifications to produce complete plans for typical/standard systems for approval.”

Level III is two exams. This one, Hydraulics and Water Supply Planning (exam 10014), covers work elements 3.9–3.11. General Plans Preparation (exam 10013) covers 3.1–3.8. NICET requires both for Level III certification.

Passing the exam is one part. NICET Water-Based Systems Layout Level III certification takes the Level I and II exams and both Level III exams, at least 5 years of experience, and supervisor verification of NICET's performance measures. Level III also takes a personal recommendation. Details: NICET certification requirements (opens nicet.org in a new tab)

What's on it

NICET's content outline splits the exam into these work elements. The range is each one's share of the questions.

  1. 3.9Calculate Standpipe Systems5–15%
  2. 3.10Calculate Water Supply with Pumps25–35%
  3. 3.11Hydraulic Calculation Principles55–65%

Source: NICET WBSL Level III content outline (PDF) (opens nicet.org in a new tab)

Exam format

  • 60 questions, 240 minutes. It has a scheduled 15-minute break that doesn't count against the 240 minutes. You can review first-section questions before the break, but not after it.
  • Computer-based, at a Pearson VUE test center.
  • One question at a time, and you can move back and forth. Some questions have an exhibit to open, a few have you click part of a picture, and some have more than one right answer. Those tell you how many to pick.
  • The appointment runs 10 minutes longer for a tutorial first. Unused tutorial time doesn't add to your exam time.
  • A calculator is built into the exam. Personal calculators aren't allowed in the testing room.
  • You can take an unscheduled break, but the exam clock keeps running.
  • You get an unofficial score report when you finish.

Source: NICET Water-Based Systems Layout program page (opens nicet.org in a new tab)

What the exam costs and which code edition it uses

NICET charges $295 per attempt at this exam (fees effective August 1, 2026). Moving your date more than 24 hours out, in the same testing window, is free. Inside 24 hours, or into a new window, NICET adds half the exam fee.

The exam is written against NFPA 13 (2022). NICET updated these exams on July 8, 2024.

A fail costs the fee again, so study until ForemanForge's readiness meter reads Exam Ready, then book one date.

Sources: NICET testing fees (opens nicet.org in a new tab) · NICET program news (opens nicet.org in a new tab)

Reference books you can bring

NICET's list for this exam allows these titles in the test center:

  • NFPA 13 (2022) — Installation of Sprinkler Systems
  • NFPA 14 (2019) — Standpipe and Hose Systems
  • NFPA 20 (2022) — Stationary Pumps for Fire Protection
  • NFPA 291 (2022) — Water Flow Testing and Marking of Hydrants
  • Brock, 3rd Ed. (2012) — Fire Protection Hydraulics and Water Supply Analysis

Rules for your books

  • Bound, or secured in a three-ring binder with a title page.
  • Highlighting and self-adhesive index tabs or dividers are fine, as long as they're permanently attached.
  • No handwritten notes. No loose pages, freestanding tabs, or repositionable sticky notes or tabs.
  • An NFPA Handbook isn't accepted in place of a listed title.
  • NICET strongly urges bringing these editions. Older or newer editions are at your own risk.
  • Some of these titles are also on-screen during the exam. NICET's list shows which.

Source: NICET's current reference list for this exam (PDF) (opens nicet.org in a new tab)

How to prepare

  1. Get the books. Buy the exact editions on NICET's list in print, bound or in a binder, and tab them.
  2. Study out of the book. Look up every answer in the code instead of memorizing it. On exam day, knowing where to find a requirement is what saves time.
  3. Spend time where the points are. Hydraulic Calculation Principles is 55–65% of this exam.
  4. Practice on the clock. NICET gives you 240 minutes for 60 questions, about 4 minutes a question.

What ForemanForge has for this exam

  • 24 lessons (the app calls this exam Level III-B).
  • 797 practice questions, with hints that point you to the code section.
  • Timed exam mode: a full-length 60-question, 240-minute exam, the same length as NICET's.
  • A readiness meter that scores you on each work element above, weighted by its share of the exam.

How ready are you for the real exam?

Example of the readiness meter: 68, Borderline.

ForemanForge's readiness meter gives you one score for the NICET WBSL Level III: Hydraulics and Water Supply Planning exam. It counts every question you answer in the lessons and practice, scores you on each work element in NICET's content outline, and weights each one by its share of the exam.

  • Your score shows after 20 answered questions and moves as you study.
  • It shows which work elements are pulling your score down, so you know what to study next.
  • Timed exams count, and it won't read Exam Ready until you've scored 70% or better on a timed exam in the last 60 days.
  • Building · under 60
  • Borderline · 60–74
  • Exam Ready · 75 and up

The score is an estimate of how you'd do on the exam, not a guarantee of passing. NICET doesn't publish a fixed pass mark.

Start studying for WBSL Level III: Hydraulics and Water Supply Planning

Lessons, practice questions, a full-length timed exam and your readiness score for the NICET Water-Based Systems Layout Level III: Hydraulics and Water Supply Planning exam.
Start free

The first lessons of every level in each track are free. Have an account? Log in

FAQ

How many questions are on the NICET WBSL Level III: Hydraulics and Water Supply Planning exam?

60 questions, and you get 240 minutes. It has a scheduled 15-minute break that doesn't count against the 240 minutes. You can review first-section questions before the break, but not after it.

Source: NICET Water-Based Systems Layout program page (opens nicet.org in a new tab)

Can I bring my code books?

Yes, the titles on NICET's list for this exam: NFPA 13 (2022), NFPA 14 (2019), NFPA 20 (2022), NFPA 291 (2022) and Brock, 3rd Ed. (2012). They have to be bound or in a three-ring binder with a title page. Highlighting and permanently attached tabs are fine. Handwritten notes and sticky notes are not.

Source: NICET reference list (PDF) (opens nicet.org in a new tab)

Can I bring my own calculator?

No. The exam has a calculator built in, and personal calculators aren't allowed in the testing room.

Source: NICET Water-Based Systems Layout program page (opens nicet.org in a new tab)

What score do I need to pass?

NICET reports a scaled score, and 500 or above is a pass. Below 500, the report shows your scaled score and, on multi-domain exams, your percent correct by domain or section.

Source: NICET score report FAQ (opens nicet.org in a new tab)

Do I need both Level III exams?

Yes. NICET splits Water-Based Systems Layout Level III into General Plans Preparation (10013) and Hydraulics and Water Supply Planning (10014), and both are required for Level III certification.

Source: NICET content outline (PDF) (opens nicet.org in a new tab)

More Water-Based Systems Layout guides